Advanced Search       

Shopping Cart
Qty 0
Total $0.00
 

 

HomeAbout Our GaugesNitrous Jet CalculatorCustomer PicturesVideo'sInstructionsAccountCartCheckoutContact Us

 

Products

 

 

Air/Co2 Shifters

 

 

 

Brackets

 

 

  Bottles & Parts

Braided Lines

Direct Port Parts

Electrical Parts

Gauges Round

Gauges Square

Gauge Adaptors

Jets

N2O Controllers

Nitrous Fittings

Nitrous kits

Openers

Purge kits

Sensors & Bungs

Solenoids

Warmer kits

 

Other Parts

 

 

 

   Wide Band Gauges

 


Under Development

Under Development

 

 

New Products

1) DynoTune Digital air shifter kill box.

 

 

2)Air/Fuel ratio lean shutoff switch

 

 

3) Low Cost Progressive controller now in stock!

 

 

 

 

 


Your IP Address
For security, your IP address is recorded as:
44.192.95.161
You are at : All > Nitrous Fittings

  Sort :

1/8"npt to 1/4" Tube straight (518)

1/8"npt to 1/4" Tube straight

Our Price: $3.00
     Item in stock!
1/8"npt to 1/4" Tube  straight




1/8" NPT to 1/4" Tube Fitting 90 Degrees (511)

1/8" NPT to 1/4" Tube Fitting 90 Degrees. This is use on the outlet of our purge kits to connect to our purge tubing.

Our Price: $4.99
     Item in stock!
1/8" NPT to 1/4" Tube Fitting 90 Degrees




1/8" to 1/8" npt adaptor 90 degrees (515)

1/8" to 1/8" npt adaptor 90 degrees

Our Price: $3.99
     Item in stock!
1/8" to 1/8" npt adaptor 90 degrees




1/8" npt to 1/8" npt coupler nipple (516)

1/8" npt to 1/8" npt coupler nipple

Our Price: $3.99
     Item in stock!
1/8" npt to 1/8" npt coupler nipple




1/8" x 1/8" x 1/8" npt "T" (517)

1/8" x 1/8" x 1/8" npt "T"

Our Price: $5.99
     Item in stock!
1/8" x  1/8" x 1/8" npt "T"




Jet Holder FItting -3AN to 1/8" NPT Pipe (512.1)

This fitting holds a standard NOS style flare jet. A -3AN braided line attaches over the jet and screws onto the fitting to seal and secure the jet in place.

Our Price: $8.95
     Item in stock!
Jet Holder FItting  -3AN to 1/8" NPT Pipe




3AN Male to 1/8"NPT Male Fitting (502.1)

3AN Male to 1/8"NPT Male Fitting standard fitting for Most EFI motorcycle nitrous kits

Our Price: $3.99
     Item in stock!
3AN Male to 1/8"NPT Male Fitting




3AN to 1/8"npt adaptor 90 degree (513)

3AN to 1/8"npt adaptor 90 degree

Our Price: $5.99
     Item in stock!
3AN to 1/8"npt adaptor 90 degree




4AN to 1/8"npt adaptor 90 degree (514)

4AN to 1/8"npt adaptor 90 degree

Our Price: $5.99
     Item in stock!
4AN to 1/8"npt adaptor 90 degree




Two Hole Gauge Adaptor 4 or 6AN Blue Swivel (501.2)

Two Hole Gauge Adaptor 4 or 6AN Blue Swivel. Use this custom fitting for all gauges and nitrous bottle heater kits to mount the pressure switch.

Our Price: $13.00
     Item in stock!
Average rating :
Two Hole Gauge Adaptor 4 or 6AN Blue Swivel




4AN Male to 1/8"NPT Male Fitting (502)

4AN Male to 1/8"NPT Male Fitting standard fitting for Most street nitrous kits

Our Price: $3.99
     Item in stock!
4AN Male to 1/8"NPT Male Fitting




6AN Male to 1/8" NPT Male Fitting (503)

6AN Male to 1/8" NPT Male Fitting for most race style nitrous kits

Our Price: $6.99
     Item in stock!
6AN Male to 1/8" NPT Male Fitting




4AN male to 4AN female Swivel (Nipple extender) (519)

4AN male to 4AN female Swivel (Nipple extender)

Our Price: $9.95
     Item in stock!
4AN male to 4AN female Swivel (Nipple extender)




1/8" to 4AN Swivel Fitting (510)

1/8" to 4AN Swivel Fitting

Our Price: $12.95
     Item in stock!
1/8" to 4AN Swivel Fitting




Blue Tube Nut and Sleeve for Fogger Nozzles (591)

Blue Tube Nut and Sleeve for Fogger Nozzles. Use this with the stainless fogger tubing and nozzles for direct port applications. The Tube Nut is 3AN for use with 3/16" tube. Comes as shown.

Our Price: $3.99
     Item in stock!
Blue Tube Nut and Sleeve for Fogger Nozzles




Red Tube Nut and Sleeve for Fogger Nozzles (592)

Red Tube Nut and Sleeve for Fogger Nozzles. Use this with the stainless fogger tubing and nozzles for direct port applications.

Our Price: $3.99
     Item in stock!
Red Tube Nut and Sleeve for Fogger Nozzles




High Flow Billet Nitrous Filter (504)

This is a high flow Billet nitrous filter that comes with a 4AN input and has an 1/8" npt outlet that screws right into your solenoid.

Our Price: $29.00
     Item in stock!
High Flow Billet Nitrous Filter




Early Mustang GT Fuel Rail Adaptor (520.2)

Mustang GT Fuel Rail Adaptor used for nitrous systems or fuel pressure gauges. 4AN male to 1/16" male NPT threads into the end of your fuel rail test port!

Our Price: $9.95
     Item in stock!
Early Mustang GT Fuel Rail Adaptor




EFI BIKE KIT 1/8" tube to nozzle fitting 90 (521.2)

EFI BIKE KIT 1/8" tube to nozzle fitting. This fitting screws into the airbox on the motorcycle...the teflon tube attaches to the fitting. The male end is 1/16" NPT.... 1/8" tube to 1/16"NPT male fitting......

Our Price: $12.00
     Item in stock!
EFI BIKE KIT 1/8" tube to nozzle fitting 90




EFI BIKE KIT 1/8" tube to 1/8" NPT male (521.1)

EFI BIKE KIT 1/8" tube to 1/8" NPT male, this is the fitting on all the EFI dry motorcycle kits that connects to the solenoid "out" port.....hooks your teflon tubing the the solenoid.

List Price: $9.95
Our Price: $7.95
You Save: $2.00 (20%)
     Item in stock!
EFI BIKE KIT 1/8" tube to 1/8" NPT male




EFI BIKE KIT 1/8" x 1/8" x 1/8" TUBE "T" (521)

EFI BIKE KIT 1/8" x 1/8" x 1/8" TUBE "T" This is the fitting thats in all the EFI dry kit for motorcycles. Splits the teflon tubing that goes to each nozzle.

Our Price: $19.95
     Item in stock!
EFI BIKE KIT 1/8" x  1/8" x 1/8" TUBE "T"




EFI BIKE KIT 1/8" teflon tubing 10 feet (521.3)

EFI BIKE KIT 1/8" teflon tubing 10 feet, for all EFI Dry motorcycle nitrous kits, only comes in 10 foot sections.

Our Price: $33.00
     Item in stock!
EFI BIKE KIT 1/8" teflon tubing 10 feet




EFI BIKE KIT BOTLLE FILL ADAPTOR (521.4)

EFI BIKE KIT, BOTLLE FILL ADAPTOR, for filling quick change nitrous bottles with pin valves.

Our Price: $15.00
     Item in stock!
EFI BIKE KIT BOTLLE FILL ADAPTOR






| Privacy |
Copyright 2024  DynoTune  
Page displayed in: 0.1563 seconds.